TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 125 of 796
TM 9-2320-366-34-4 (16) Install bushing (22) in end housing (23). (17) Install bearing (24) in end housing (23). NOTE Transfer matchmarks to replacement parts prior to installation. (18) Position end housing (23) on stator (17) with matchmarks aligned. (19) Position nine self-locking nuts (25) on stator (17). (20) Tighten nine self-locking nuts (25) to 45 lb-in. (5 N·m). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (21) Apply sealing compound to threads of screw (26) and five screws (27). (22) Position jumpers (28 and 29) and terminal lug (30) on front housing (15) with washer (31) and screw (26). (23) Position five terminal lugs (32) and jumpers (33) on front housing (15) with five washers (34) and screws (27). (24) Tighten screw (26) and five screws (27) to 30 lb-in. (3 N·m). Change 1 18-71