TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 123 of 796
TM 9-2320-366-34-4 NOTE Transfer matchmarks to replacement parts prior to installation. (3) Position rotor (10) on shaft (11) with matchmarks aligned. (4) Position six washers (12) and self-locking nuts (13) on shaft (11). (5) Tighten six self-locking nuts (13) to 45 lb-in. (5 N·m). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. NOTE Install retaining rings in positions noted during removal. (6) Install retaining ring (14) in front housing (15). (7) Press bearing (16) in front housing (15). (8) Install retaining ring (17) in front housing (15). (9) Install shaft (11) in front housing (15). Change 1 18-69