TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 122 of 796
TM 9-2320-366-34-4 18-6. 200 AMP ALTERNATOR REPAIR (CONT) (35) Remove six self-locking nuts (74) and washers (75) from rotor (76). Discard self-locking nuts. (36) Match mark rotor (76) to shaft (3). (37) Install three jacking screws in small threaded holes in rotor (76). (38) Remove rotor (76) from shaft (3) by alternately turning three jacking screws two full turns. (39) Remove three jacking screws from rotor (76). (40) Remove nut (77), lockwasher (78), washer (79), and fuse (80) from 24 vdc post (33). Discard lockwasher. (41) Remove nut (81), lockwasher (82), and washer (83) from 12 vdc post (39). Discard lockwasher. b. Assembly. (1) Position washer (1) and lockwasher (2) on 12 vdc post (3) with nut (4). (2) Position fuse (5), washer (6), and lockwasher (7) on 24 vdc post (8) with nut (9). 18-68 Change 1