TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 115 of 796
TM 9-2320-366-34-4 NOTE Use bolts P/N 12414307-141 and self-locking nuts P/N 12414308-025 on step (48). (48) Position two bolts (60) and self-locking nuts (61) in rear lower crossmember support (43). (49) Tighten two self-locking nuts (45 and 61) to 196-240 lb-ft (265-325 N·m). (50) Tighten six self-locking nuts (54) to 76-94 lb-ft (103-125 N·m). (51) Tighten four bolts (49) and two bolts (51) to 236-288 lb-ft (319-389 N·m). (52) Tighten two self-locking nuts (14) on L-brackets (12). NOTE Left and right clamps are installed the same way. Right side shown. (53) Install clamp (11) on L-bracket (12) with screw (10) and self-locking nut (9). (54) Perform step (53) on left side clamp. End of Task. Change 1 18-61