TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 114 of 796
TM 9-2320-366-34-4 18-5. M1085 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) WARNING Pintle hook extension weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (45) requires the aid of two assistants. • Use bolts P/N 12414307-142 and self-locking nuts P/N 12414308-025 on step (45). (45) Position pintle hook extension (39) on rear crossmember (5) with four bolts (58) and self-locking nuts (59). NOTE • Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (46). • Steps (46) through (57) require the aid of an assistant. (46) Position two bolts (40) and self-locking nuts (41) in pintle hook extension (39). (47) Tighten four self-locking nuts (59) and two self-locking nuts (41) to 196-240 lb-ft (265-325 N·m). 18-60 Change 1