Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download

Page 111 of 796

TM 9-2320-366-34-4 NOTE • Position two spacers on frame rails with beveled edges facing down. • Use bolts P/N 12414307-148 and P/N 12414307-149 and self-locking nuts P/N 12414308-025 on steps (27) and (28). • Left and right side of rear main crossmember support is installed the same way. Right side shown. • Route connectors and terminal lugs under rear main crossmember. (27) Position two spacers (46) and rear main crossmember support (47) on LH and RH frame rails (48 and 36) with four bolts (49) and self-locking nuts (50). (28) Position two bolts (51) and self-locking nuts (52) on rear main crossmember support (47). NOTE Use bolts P/N 12414307-079 and self-locking nuts P/N 12414308-021 on step (29). (29) Position six bolts (53) and self-locking nuts (54) on rear lower crossmember support (43). NOTE Rotate cable assembly with terminal lugs 180 degrees (upside down) from previous position. (30) Route terminal lugs TL32 (19), TL31 (25), and TL30 (30) to three ground terminals (55). Change 1 18-57