TM-9-2320-366-34-4 MTV Direct Maintenance Manual M1083 Series - Volume 4 Download
Page 100 of 796
TM 9-2320-366-34-4 18-4. M1084/M1086 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) WARNING Pintle hook extension weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (59) requires the aid of two assistants. • Use bolts P/N 12414307-142 and self-locking nuts P/N 12414308-025 on step (59). (59) Position pintle hook extension (57) on rear crossmember (9) with four bolts (76) and self-locking nuts (77). NOTE • Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (60). • Steps (60) and (61) require the aid of an assistant. (60) Position two bolts (58) and self-locking nuts (59) in pintle hook extension (57). (61) Tighten four self-locking nuts (77) and two self-locking nuts (59) to 196-240 lb-ft (265-325 N·m). 18-46 Change 1