TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 993 of 1178
TM 9-2320-366-34-3 D-39. COMPRESSOR HOSE FABRICATION 12417926 Cut compressor hoses from bulk hose using a fine-toothed hacksaw or suitable cutting device. Assemble the cut hoses to the fittings. The following table lists the hoses and the components from which the assemblies are made. Hose Assembly Part Number Bulk Hose Part Number Cutoff Length in inches (cm) Fitting A Fitting B 12417926-001 SAE 100R14-10 110 (279.4) SAE 30011010 SAE 30011010 12417926-002 SAE 100R14-10 16.5 (41.9) SAE 30011010 SAE 30011010 12417926-004 SAE 100R14-4 16.5 (41.9) SAE 300144 SAE 300144 D-40. STEERING GEAR RETURN HOSE AND TRANSMISSION OIL COOLER HOSES FABRICATION Cut the following hoses from bulk hose using a fine-toothed hacksaw or suitable cutting device. Hose Part Number Bulk Hose Part Number Cut Length inches cm 12418037 A110 (30327) 75.5 191.7 12418460-001 MS521302B110360 (96906) 17.5 44.4 12418460-002 MS521301A206R (96906) 16.0 40.6 D-41. LANYARD ASSEMBLIES P/N 12418763 AND 12420196 FABRICATION Make the following lanyard assemblies from bulk cable material, sleeves, and tab material and assemble according to Figure D-56. Lanyard Assembly. The following parts list identifies part numbers and lengths of cut pieces. Item Part Number Material Description Size Qty 1 MIL-W-83420 Type 1, Comp B 1/16 in. stranded wire cable 4 in. (102 mm) 1 2 MS51844-22 Sleeve 2 3 N/A Tab, Stainless Steel ASTM A617 0.06 in. (1.5 mm) X 0.37 in. (9.5 mm) X 1.25 in. (32 mm) 1 D-69 D-69