TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 951 of 1178
TM 9-2320-366-34-3 Item Part Number Material Description Size Qty 2 12419144-002 Plate, Steel, ASTM A-36 20.62 in. (523.7 mm) x 7.25 in. (184.1 mm) x 0.312 in. (7.9 mm) thick 1 Figure D-21. Engine Stand Bracket Rear Plate a. All dimensions are in inches (millimeters). b. Fabricate (2) from ASTM A-36 steel plate. c. Drill 0.563 in. (14.3 mm) diameter hole through 2 places in rear plate as shown in Figure D-21. Engine Stand Bracket Rear Plate. d. Drill 0.438 in. (11.1 mm) diameter hole through 4 places in rear plate as shown in Figure D-21. Engine Stand Bracket Rear Plate. e. Cut or mill between 0.438 in. (11.1 mm) diameter holes as shown in Figure D-21. Engine Stand Bracket Rear Plate. f. De-burr and remove all sharp edges. Change 1 D-27