TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 937 of 1178
TM 9-2320-366-34-3 Figure D-7. Cab Maintenance Stand Brace Bracket Locations h. Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (0.96 cm) holes through 4 support braces (4) and through 2 supports (6) as shown in Figure D-7. Cab Maintenance Stand Brace Bracket Locations. i. Make 2 B braces by securing to each end of support (6), braces (4) and straight brackets (10) using 16 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15). j. Using straight bracket (10) as a template, mark holes and match drill 0.38 in. (0.96 cm) holes through 2 support braces (5) and through 1 support (6) as shown in Figure D-7. Cab Maintenance Stand Brace Bracket Locations. k. Make C brace by securing to each end of support (6), brace (5) and straight brackets (10) using 8 bolts (11), flat washers (13), lockwashers (14), and hex nuts (15). D-13 D-13