TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 897 of 1178
TM 9-2320-366-34-3 WARNING Hoist cylinder weighs approximately 430 lbs (195 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (3) through (12) require the aid of an assistant. (3) Raise hoist cylinder (4) until holes in subframe assembly (5) are above frame (6). (4) Install wrecking bar through holes in subframe assembly (5). (5) Lower hoist cylinder (4) until weight of subframe assembly (5) is supported by wrecking bar. (6) Remove hydraulic hose (1) from hoist cylinder (4). (7) Remove hydraulic hose (2) from hoist cylinder (4). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (8) Remove retaining ring (7) from pin (8). (9) Remove pin (8) from hoist cylinder (4). 17-27