TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 896 of 1178
TM 9-2320-366-34-3 17-26 Change 2 17-4. M1090/M1094 DUMP BODY HOIST CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-366-20-3). Dump body removed (para 15-10). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Pliers, Retaining Ring (Item 45, Appendix B) Pan, Drain (Item 43, Appendix B) Bar, Wrecking (Item 6, Appendix B) Sling, Cargo (4) (Item 56, Appendix B) Tools and Special Tools (Cont) Lifting Brackets, Dump Body (Item 8, Appendix D) Materials/Parts Shackles (4) (Item 80, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Personnel Required (2) a. Removal. (1) Place drain pan under hoses (1 and 2). (2) Disconnect hydraulic hoses (1 and 2) from control valve (3). CAUTION Cap or plug hydraulic hoses and connection points to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting.