TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 891 of 1178
TM 9-2320-366-34-3 Change 2 17-21 (15) Lower engine speed to idle (TM 9-2320-366-10-1). (16) Position PTO switch to OFF (TM 9-2320-366-10-1). (17) Shut down engine (TM 9-2320-366-10-1). (18) Disconnect pressure test cable (5) from pressure transducer (6) and to STE/ICE. (19) Remove 10,000-PSI transducer (6) from test hose (4). (20) Disconnect test hose (4) and adapter (3) from tee fitting (2). WARNING • Wear appropriate eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that comes into contact with lubricating oil should be thoroughly washed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. • Lubricating oil is slippery and can cause falls. Wipe up spilled oil with rags. Failure to comply may result in injury to personnel.