TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 889 of 1178
TM 9-2320-366-34-3 Change 2 17-19 i. Pressure Reducing Valve Adjustment. (1) Raise dump body to maintenance position (TM 9- 2320-366-10-1). (2) Position drain pan under four way relief valve (1). (3) Remove cap from tee fitting (2) on port B. (4) Install adapter (3) and test hose (4) on tee fitting (2) at port B. (5) Connect pressure teat cable (5) to transducer (6) and to STE/ICE. (6) Start engine (TM 9-2320-366-10-1). (7) Position PTO switch to ON (TM 9-2320-366-10-1). (8) Attach a temperature indicator sticker to hydraulic oil hydraulic tank (7). (9) Increase engine RPM to 1250-1450 (TM 9-2320- 366-10-1). WARNING • Wear appropriate eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that comes into contact with lubricating oil should be thoroughly washed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. • Lubricating oil is slippery and can cause falls. Wipe up spilled oil with rags. Failure to comply may result in injury to personnel.