TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 885 of 1178
TM 9-2320-366-34-3 Change 2 17-15 h. Relief Valve Adjustment. (1) Raise dump body to maintenance position (TM 9- 2320-366-10-1). (2) Position drain pan under four way relief valve (1). (3) Install adapter (2) and test hose (3) on tee fitting (4). (4) Disconnect hose A (5) from tee fitting (6). (5) Install cap (7) on tee fitting. (6) Install plug (8) in hose A (5). (7) Install high pressure transducer (9) (0-10,000 psi [0-68,965 kPa]) on test hose (3). (8) Connect pressure test cable (10) to pressure transducer (9) and to STE/ICE. WARNING • Wear appropriate eye protection when performing pressure checks. Failure to comply may result in oil getting into eyes. If oil contacts eyes, seek medical attention immediately. Failure to comply may result in injury to personnel. • Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that comes into contact with lubricating oil should be thoroughly washed immediately. Areas in which lubricating oil is used should be well ventilated to keep fumes to a minimum. Failure to comply may result in injury to personnel. • Lubricating oil is slippery and can cause falls. Wipe up spilled oil with rags. Failure to comply may result in injury to personnel. NOTE Route test hose between frame and exit under vehicle.