TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 881 of 1178
TM 9-2320-366-34-3 Change 2 17-14.9 (19) Install four preformed packings (30) on three tee fittings (31) and fitting (32). (20) Position three tee fittings (31) and fittings (32) in valve body (5). (21) Tighten three tee fittings (31) and fitting (32) to 79- 88 lb-ft (107-119 N•m). (22) Install three caps (33) on tee fittings (31). (23) Install four preformed packings (34) on valve body (5). (24) Position solenoid valve (35) on valve body (5) with four screws (36). (25) Tighten four screws (36) to 44-62 lb-in. (5-7 N•m). f. Assembly (P/N HFC32585). (1) Install two back up rings (1) and preformed packings (2 and 3) on needle valve (4). (2) Position needle valve (4) in valve body (5). (3) Tighten needle valve (4) to 35-40 lb-ft (47-54 N•m).