TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 862 of 1178
TM 9-2320-366-34-3 17-2. SUSPENSION CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Cab raised (TM 9-2320-366-10-1). Top radiator fan shroud removed (TM 9-2320-366-20- 3). (LH side only). Engine front resilient mounts removed (para (3-4). (LH side only). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Tools and Special Tools (Cont) Wrench Set, Socket (Item 84, Appendix B) Socket Set, Socket Wrench (Item 59, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix D) Hydraulic Fluid A (Item 40.3, Appendix C) Packing, Preformed (2) (Item 235, Appendix F) Nut, Self-Locking (Item 191, Appendix F) Pin, Cotter (Item 325.1, Appendix F) Personnel Required (2) a. Removal. NOTE Left and right suspension cylinders are removed the same way. Right side shown. (1) Remove two quick release pins (1) from suspension cylinder (2). (2) Remove screw (3) and two lanyards (4) from suspension cylinder (2). 17-2 Change 1