TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 856 of 1178
TM 9-2320-366-34-3 16-94. M1089 WRECKER CONTROL PANEL REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions WRECKER CONTROL PANEL power cable assembly removed (TM 9-2320-366-20-4). WRECKER CONTROL PANEL hoses and tubing removed (TM 9-2320-366-20-5). Upper main valve assembly removed (para 16-83). Lower valve assembly removed (para 16-84). Linear directional control valve removed (para 16-83). Underplate, splash guard, and brackets removed (TM 9-2320-366-20-4). Eight-bank valve assembly removed (para 16-59). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Tools and Special Tools (Cont) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench Set, Socket (Item 85, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Nut, Self-Locking (2) (Item 199, Appendix F) Nut, Self-Locking (3) (Item 199.2, Appendix F) Nut, Self-Locking (2) (Item 199.1, Appendix F) Personnel Required (2) a. Removal. (1) Remove two nuts (1) and adapters (2) from WRECKER CONTROL PANEL (3). (2) Remove two self-locking nuts (4), washers (5), screws (6), and handle (7) from WRECKER CONTROL PANEL (3). Discard self-locking nuts. 16-586 Change 1