TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 853 of 1178
TM 9-2320-366-34-3 Change 2 16-584.1 (12.1) Tighten four screw (15). (12.2) Tighten four screws (15) to 26-35 lb-ft (35-47 N•m). (12.3) Fold tabs on four screws (15). (13) Install preformed packing (16) on fitting (17). (14) Install fitting (17) on transmission oil cooler (18). (14.1) Install preformed packing (18.1) on fitting (17). NOTE • Perform steps (13) through (14.9) on vehicles equipped with transmission oil cooler tubes. • Perform steps (13) and (14) on vehicles not previously equipped with corrosive enhanced fittings. NOTE • Perform step (12.1) on kits equipped with shearhead screws. • Alternately tighten screw. • When correct torque is reached, bearing cup small screw hex head will break off. NOTE Perform steps (12.2) and (12.3) on bearing cups equipped with tabs.