TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 851 of 1178
TM 9-2320-366-34-3 WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles/glasses when using; avoid contact with eyes. If sealant contacts eyes, flush with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Perform steps (1.12) through (9) on PTO Assembly (P/N 276XMF-JX-D5XK). (1.12) Install four threaded studs (1) in PTO (2). (2) Apply sealing compound to 90-degree fittings (3 and 4). (3) Install preformed packing (5) on 90-degree fitting (3). (4) Position 90-degree fitting (3) in PTO (2). (5) Install preformed packing (6) on 90-degree fitting (4). (6) Position 90-degree fitting (4) in transmission (7). (7) Tighten 90-degree fittings (3 and 4) to 10-13 lb-ft (14-18 N·m). NOTE Step (8) requires the aid of an assistant. (8) Position gasket (8) and PTO (2) on transmission (7) with eight screws (9). (9) Tighten eight screws (9) to 42-50 lb-ft (57-68 N·m). Change 1 16-583