TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 85 of 1178
TM 9-2320-366-34-3 Change 2 15-29 c. Assembly. (1) Install two rubber plugs (1) in cab (2). (2) Install two plastic plugs (3) in cab (2). (3) Install 36-clinch nuts (4) in cab clearance and marker light (5) mounting holes. (4) Install four washers (6) and plastic plugs (6.1) in cab (2). (5) Install grille clip-on nut (7) on cab (2). (6) Install two-grille expansion nuts (8) on cab (2). (7) Position three mounting brackets (9) on cab (2) with 12 screws (10). (8) Tighten 12 screws (10) to 36-44 lb-in. (4-5 N•m). (9) Install davit (11) in mounting brackets (9). NOTE Perform steps (7) through (9) on M1093 and M1094.