TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 849 of 1178

TM 9-2320-366-34-3 (40) Position gasket (44) and bearing cap (40) on housing (2) with four screws (45). (41) Tighten four screws (45) to 16-20 lb-ft (22-27 N m). CAUTION Output shaft should turn freely in bearing cap and have no side-to-side movement. Failure to comply may result in damage to equipment. (42) Turn output shaft (23) in bearing cap (40). (43) Install solenoid electrical connector (46) in valve body (14). Change 1 16-582.1