TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 848 of 1178
TM 9-2320-366-34-3 16-93. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT) NOTE Perform step (28) on PTO Assembly (P/N 276XMF-JX-D5XK). (28) Install key (33) in output shaft (23). CAUTION Verify ring installed with open face toward back-up cylinder. Failure to comply may result in damage to equipment. (29) Install vee ring (34) on piston (35). (30) Install piston (35) on output shaft (23). (31) Install back-up cylinder (36) on output shaft (23). (32) Press down back-up cylinder (36). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (33) Install retaining ring (37) on output shaft (23). (34) Install spacer (38) on output shaft (23). (35) Install bearing (39) in bearing cap (40). (36) Install retaining ring (41) in bearing cap (40). (37) Install bearing cap (40) on output shaft (23). (38) Install retainer ring (42) on output shaft (23). (39) Press oil seal (43) in bearing cap (40). 16-582 Change 1