TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 830 of 1178
TM 9-2320-366-34-3 16-570 Change 2 16-93. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-366-10-1). Batteries disconnected (TM 9-2320-366-20-3). Hydraulic rotary pump removed, if equipped (para 16-91). M1089 three stage hydraulic pump removed, if equipped (para 16-92). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 93, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Pliers, Retaining Ring (Item 45, Appendix B) Pliers, Retaining Ring (Item 46, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Rubber (Item 26, Appendix B) Crowfoot, Attachment, Socket Wrench (Item 12.1, TM 9-2320-366-20 Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Spindle Compound #2 (Item 83.2 Appendix C) Cap and Plug Set (Item 17, Appendix C) Gasket (Item 49, Appendix F) Ties, Cable Plastic (Item 92, Appendix C) Sealing Compound (Item 41, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Packing, Preformed (2) (Item 250, Appendix F) Gasket (Item 53, Appendix F) Seal, Encased (2) (Item 389, Appendix F) Gasket (Item 52, Appendix F) Seal, Plain Encased (Item 390, Appendix F) Packing, Preformed (Item 273, Appendix F) Packing, Preformed (Item 272, Appendix F) Packing, Preformed (Item 271, Appendix F) Packing, Preformed (Item 270, Appendix F) Packing, Preformed (Item 274, Appendix F) Packing, Preformed (Item 236, Appendix F) Rag, Wiping (Item 60, Appendix C) Solvent, Dry Cleaning (Item 83, Appendix C) Lubricating Oil, Engine (Item 46, Appendix C) Packing, Preformed (2) (Item 224.1, Appendix F) Screw, Cap (4) (Item 366.1, Appendix F) Personnel Required (2) a. Removal. (1) Disconnect electrical connectors P216 (1) and P217 (2) from PTO (3). WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. NOTE • Remove plastic cable ties as required. • Tag electrical connectors and connection points prior to disconnecting.