TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 828 of 1178
TM 9-2320-366-34-3 16-92. M1089 THREE STAGE HYDRAULIC PUMP REPLACEMENT (CONT) (4) Position 90-degree fitting (2) in three stage hydraulic pump (7). (5) Position two fittings (4) in three stage hydraulic pump (7). (6) Tighten two fittings (4) and 90-degree fitting (2) to 127- 133 lb-ft (172-180 N·m). (7) Position adapter (8) on fitting (4). (8) Tighten adapter (8) to 127-133 lb-ft (172-180 N·m). (9) Position three fittings (6) in three stage hydraulic pump (7). (10) Tighten three fittings (6) to 68-75 lb-ft (92-102 N·m). (11) Position three hoses (9) on three stage hydraulic pump (7). (12) Tighten three hoses (9) to 127-133 lb-ft (172-180 N·m). (13) Position three hoses (10) on three stage hydraulic pump (7). (14) Tighten three hoses (10) to 79-88 lb-ft (107-119 N·m). WARNING Three stage hydraulic pump weighs approximately 70 lbs (32 Kgs). Attach suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (15) requires the aid of an assistant. (15) Install three stage hydraulic pump (7) on Power Takeoff (PTO) (11) with four washers (12) and nuts (13). 16-568 Change 1