TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 825 of 1178

TM 9-2320-366-34-3 16-92. M1089 THREE STAGE HYDRAULIC PUMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-366-20-3). Hydraulic tank removed (TM 9-2320-366-20-5). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench Set, Crowfoot, Ratcheting (TM 9-2320-366-20) Wrench Set, Socket (Item 84, Appendix B) Goggles, Industrial (Item 28, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Packing, Preformed (3) (Item 230, Appendix F) Packing, Preformed (3) (Item 233, Appendix F) Lubricating Oil, Engine (item 35, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION Cap or plug hydraulic connections to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (1) Disconnect two hoses (1) from tubes (2). (2) Disconnect hose (3) from adapter (4). 16-565