TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 821 of 1178
TM 9-2320-366-34-3 16-90. 15K SELF-RECOVERY WINCH (SRW) HYDRAULIC MOTOR REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions 15K Self-Recovery Winch (SRW) counterbalance/ cartridge valve removed (para 16-89). Tools and Special Tools Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Tools and Special Tools (Cont) Tool Kit, Genl Mech (Item 78, Appendix B) Materials/Parts Gasket (Item 54, Appendix F) Lockwasher (2) (Item 158, Appendix F) a. Removal. (1) Remove two screws (1), lockwashers (2), washers (3), and hydraulic motor (4) from 15K SRW (5). Discard lockwashers. (2) Remove gasket (6) from hydraulic motor (4). Discard gasket. b. Installation. (1) Install gasket (1) on hydraulic motor (2). (2) Position hydraulic motor (2) on 15K SRW (3) with two washers (4), lockwashers (5), and screws (6). (3) Tighten two screws (6) to 70-95 lb-ft (95-129 N·m). c. Follow-On Maintenance. (1) Install counterbalance valve (para 16-89). (2) Operate 15K Self-Recovery Winch (SRW) and check for hydraulic leaks (TM 9-2320-366-10-2). End of Task. 16-561