TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 82 of 1178
TM 9-2320-366-34-3 15-2. CAB REPLACEMENT (CONT) NOTE Left and right side door seals, check valve boots, and door strike catch plates are removed the same way. Left side shown. (57) Remove door seal (109) from cab (23). Discard door seal. (58) Remove ventilation check valve boot (110) from door post (111). (59) Remove three screws (112), door catch strike plate (113), shim (114), and threaded plate (115) from door post (111). (60) Perform steps (57) through (59) on right side door seals, check valve boot, and door catch strike plate. NOTE Perform step (61) on all models except M1093 and M1094. (61) Remove two button plugs (116) from door posts (111). Discard button plugs. NOTE Perform step (62) on M1093 and M1094. (62) Remove six button plugs (117) from two door posts (111). Discard button plugs. 15-26