TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 811 of 1178
TM 9-2320-366-34-3 (8) Install preformed packing (16) on gear end support (17). (9) Position gear end support (17) on two base mounts (4) with eight lockwashers (18) and screws (19). (10) Tighten eight screws (19) to 70-95 lb-ft (95-129 N·m). WARNING Use care when installing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (11) Install two washers (20), springs (21), and cable retainer pins (22) on base mounts (4) with spring pins (23). (12) Install gear end flange (11) on gear end support (17). 16-551