TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 808 of 1178
TM 9-2320-366-34-3 (11) Check diameter of shoulder on shoulder shaft (7). Minimum diameter is 0.345 in. (0.88 cm). (12) Check that shifter arm (8) is not broken or bent. (13) Inspect shifter drive gear (9) for wear, pitting, or broken teeth. (14) Check ball bearing (10) for free rotation of inner race to outer race. (15) Check ball bearing (10) for pitting and corrosion. (16) Inspect primary sun gear (11) for wear, pitting, or broken teeth. (17) Check bearing (12) for free rotation of inner race to outer race. (18) Check bearing (12) for pitting and corrosion. (19) Inspect drum seal bore surface on motor end flange (13) for scratches or pits. 16-548 16-88. 15K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT)