TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 804 of 1178
TM 9-2320-366-34-3 (25) Remove primary carrier (40) from ring gear (34). (26) Remove secondary carrier (41) from ring gear (34). (27) Remove gear end flange (42) from gear end support (43). WARNING Use care when removing springs. Springs are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (28) Remove two spring pins (44), cable retainer pins (45), springs (46), and washers (47) from base mounts (19). Discard spring pins. 16-544 16-88. 15K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT)