TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 802 of 1178

TM 9-2320-366-34-3 (12) Remove eight bolts (17), lockwashers (18), and motor end support (4) from two base mounts (19). Discard lockwashers. (13) Remove primary sun gear (20) from motor end flange (21). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (14) Remove retaining ring (22) and ball bearing (23) from primary sun gear (20). (15) Remove locator pin (24), compression spring (25), and shifter round knob (26) from arm shifter (15). Discard compression spring. (16) Remove spring pin (27) and arm shifter (15) from shoulder shaft (28). Discard spring pin. (17) Remove two preformed packings (29) from shoulder shaft (28). Discard preformed packings. 16-542 16-88. 15K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT)