TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 789 of 1178
TM 9-2320-366-34-3 (13) Position catwalk (17) on vehicle with four isolators (18), screws (19), washers (20), and self-locking nuts (21). (14) Tighten four self-locking nuts (21) to 27-33 lb-ft (37-48 N·m). e. Adjustment. (1) Open left and right 30K winch catwalks (TM 9-2320-366- 10-2). NOTE Left and right side pilot pressure are adjusted the same way. Pressure readings are read at the 30K winch relief valve. Adjustment of pressure is made at the cartridge valve on the 30K winch hydraulic motor. Left side shown. (2) Disconnect hose (1) from tee fitting (2). (3) Install adapter (3) on tee fitting (2). (4) Connect hose (1) to adapter (3). (5) Install pressure transducer (4) in adapter (3). (6) Connect test cable (5) to pressure transducer (4). 16-531