TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 761 of 1178
TM 9-2320-366-34-3 (18) Remove solenoid assembly (24) from lower control valve assembly (2). NOTE Note position of seals, packings, and retaining plates prior to removal. (19) Remove seal (25), preformed packing (26), retaining plate (27) and spacer (28) from solenoid assembly (24). Discard preformed packing and seal. (20) Remove two screws (29), retaining plates (30), retaining packing (31), and seal (32) from lower control valve assembly (2). Discard retaining packing and seal. (21) Remove piston rod (33) from stripper bolt (34). (22) Remove spacer (35) and flange (23) from piston rod (33). (23) Remove inner seal (36) from flange (23). Discard seal. CAUTION Piston rod is made of aluminum and can be easily damaged. Failure to comply will result in damage to equipment. (24) Place piston rod (33) in soft vise. (25) Remove cap screw (37) and piston (21) from piston rod (33). Change 1 16-516.1