TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 749 of 1178
TM 9-2320-366-34-3 WARNING Adhesives, solvents, and sealing com- pounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (37) Apply adhesive to threads of cap screw (51). (38) Position piston (52) on piston rod (53) with cap screw (51). (39) Position piston rod (53) in vise. (40) Tighten cap screw (51) to 75 lb-in. (8 N·m). (41) Install inner seal (54) in flange (55). (42) Position flange (55) and spacer (56) on piston assembly (57). (43) Install piston assembly (57) in stripper bolt (46). (44) Position seal (58), preformed packing (59), and retaining plates (60) on upper control valve assembly (27) with two screws (61). (45) Install spacer (62), retaining plate (63), preformed packing (64), and seal (65) on solenoid assembly (66). (46) Position solenoid assembly (66) in upper control valve assembly (27). Change 1 16-505