TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 746 of 1178
TM 9-2320-366-34-3 16-83. M1089 UPPER CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR (CONT) (16) Install gasket (21) on valve (18). (17) Install two gaskets (22) on valve (18). (18) Position valve (23) with valve (18). CAUTION When positioning studs, washers and nuts, an even amount of threads must show on either side of stud after applying torque. Failure to comply may result in damage to equipment. NOTE Apply lubricating oil to all studs prior to installation. (19) Position four studs (24), eight washers (25), and nuts (26) in upper control valve assembly (27). (20) Tighten eight nuts (26) to 29 lb-ft (39 N·m). (21) Re-tighten eight nuts (26) to 42 lb-ft (57 N·m). 16-502.12 Change 1