TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 734 of 1178

TM 9-2320-366-34-3 16-502 Change 2 16-83. M1089 UPPER CONTROL VALVE ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Batteries disconnected (TM 9-2320-366-20-3). Control panel assembly covers removed (TM 9-2320-366-20-5). Hydraulic reservoir supply and return valve closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Goggles, Industrial (Item 28, Appendix B) Pan, Drain (Item 43, Appendix B) Vise, Machinist (Item 82, Appendix B) Caps, Vise Jaw (Item 12, Appendix B) Wrench, Torque 0-175 lb-ft (Item 84, Appendix B) Wrench Set, Crowfoot Ratcheting (Item 87, Appendix B) (TM 9-2320-366-20) Materials/Parts Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Pin, Cotter (2) (Item 332, Appendix F) Packing, Preformed (4) (Item 232, Appendix F) Packing, Preformed (2) (Item 230, Appendix F) Packing, Preformed (6) (Item 237, Appendix F) Parts Kit, Seal Replacement (Item 313.3, Appendix F) Parts Kit, Seal Replacement (Item 313.1, Appendix F) Parts Kit, Seal Replacement (4) (Item 313.2, Appendix F) Lubricating Oil, Engine (Item 45, Appendix C) Sealing Compound (Item 76.2, Appendix C) Sealing Compound (Item 71.1, Appendix C) Sealant (Item 65.2 Appendix-C) Personnel Required (2) a. Removal. (1) Remove two cotter pins (1) from rod (2). Discard cotter pins. (2) Position rod (2) to the left past handle (3).