TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 715 of 1178

TM 9-2320-366-34-3 Change 2 16-488.1/(16-488.2 Blank) c. Assembly. (1) Install preformed packing (1) on adapter (2). (2) Position adapter (2) in SECONDARY CIRCUIT SELECTOR VALVE (3). (3) Tighten adapter (2) to 112-123 lb-ft (152-167 Nm). (4) Install preformed packing (4) on 90-degree fittings (5 and 6). (5) Install 90-degree fittings (5 and 6) in SECONDARY CIRCUIT SELECTOR VALVE (3). (6) Tighten 90-degree fitting (5 and 6) to 112-123 lb-ft (152-167 Nm). (7) Position 90-degree fitting (7) on adapter (2). (8) Tighten 90-degree fitting (7) to 68-75 lb-ft (92-101 Nm). d. Installation. (1) Install SECONDARY CIRCUIT SELECTOR VALVE (1) in control panel (2) with screw (3), washer (4), spacer (5), and self-locking nut (6). (2) Install screw (7), washer (8), and self-locking nut (9) in SECONDARY CIRCUIT SELECTOR VALVE (1).