TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download

Page 705 of 1178

TM 9-2320-366-34-3 (40) Position gladhand bracket (52) on spooler weldment (3) with two screws (53), four washers (54), and two self- locking nuts (55). (41) Tighten two self-locking nuts (55) to 76-84 lb-ft (103-114 N·m). (42) Install sandshoe (56) on stiffleg (14) with two screws (57), six washers (58), and two self-locking nuts (59). (43) Install tow lock pins (60) in sandshoe (56). NOTE Left and right side pay-out hydraulic motors are installed the same way. Left side shown. (44) Position pay-out hydraulic motor (61) on spooler weldment (3) with two washers (62) and bolts (63). (45) Tighten two bolts (63) to 76-84 lb-ft (103-114 N·m). (46) Position two hoses (64) on pay-out hydraulic motor (61). (47) Tighten two hoses (64) to 36-39 lb-ft (49-53 N·m). 16-479