TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 703 of 1178
TM 9-2320-366-34-3 (25) Tighten four bolts (25) to 152-168 lb-ft (206-228 N·m). (26) Route 30K winch cable (30) through spooler weldment (3). (27) Install pin (31) in 30K winch cable (30) with cotter pin (32). (28) Install cable sheave (33) in spooler weldment (3). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (29) Install pin (34) in spooler weldment (3) with two retaining rings (35). 16-477