TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 700 of 1178
TM 9-2320-366-34-3 16-78. M1089 STIFFLEG ASSEMBLY REPAIR (CONT) NOTE • Note position of stiffleg bracket holes prior to installation. • If replacement stiffleg cylinder is being installed, it will be necessary to extend stiffleg cylinder rod prior to installation. • Steps (8) through (12) require the aid of an assistant. (8) Install two stiffleg cylinder brackets (12) on stiffleg cylinder (13). (9) Install stiffleg cylinder (13) in stiffleg (14). (10) Position two plates (15) on stiffleg (14) with 12 screws (16). (11) Tighten 12 screws (16) to 105-115 lb-ft (142-156 N·m). (12) Install cylinder retaining pin (17) in stiffleg (14). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (13) Install two retaining rings (18) on cylinder retaining pin (17). 16-474