TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 696 of 1178
TM 9-2320-366-34-3 16-78. M1089 STIFFLEG ASSEMBLY REPAIR (CONT) WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (15) Remove two retaining rings (35) and pin (36) from spooler weldment (7). (16) Remove cable sheave (37) from spooler weldment (7). (17) Remove cotter pin (38) and pin (39) from 30K winch cable (40). Discard cotter pin. (18) Pull 30K winch cable (40) back through spooler weldment (7). WARNING Spooler weldment weighs approximately 130 lbs (59 Kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (19) Remove eight bolts (41), washers (42), and tow chain anchor (43) from spooler weldment (7). 16-470