TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 693 of 1178
TM 9-2320-366-34-3 16-78. M1089 STIFFLEG ASSEMBLY REPAIR This task covers: a. Disassembly b. Assembly c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Stiffleg extended (TM 9-2320-366-10-2). Engine shut down (TM 9-2320-366-10-1). Hydraulic reservoir supply and return valves closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 97, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Wrench, Torque, 0-300 lb-in. (Item 95, Appendix B) Goggles, Industrial (Item 28, Appendix B) Gloves, Welders (Item 26, Appendix B) Wrench Set, Socket (Item 84, Appendix B) Sling, Cargo (Item 56, Appendix B) Tools and Special Tools (cont) Pan, Drain (Item 43, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Sealing Compound (Item 75, Appendix C) Nut, Self-locking (8) (Item 179, Appendix F) Nut, Self-locking (2) (Item 176, Appendix F) Nut, Self-locking (Item 177, Appendix F) Lockwasher (3) (Item 130, Appendix F) Pin, Cotter (Item 327, Appendix F) Nut, Self-locking (4) (Item 180, Appendix F) Solvent, Dry Cleaning (Item 83, Appendix C) Personnel Required (3) a. Disassembly. NOTE Left and right side mudflaps are removed the same way. Left side shown. (1) Remove two lock pins (1) and mudflap (2) from vehicle. 16-467