TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 692 of 1178
TM 9-2320-366-34-3 16-77. M1089 FOLDING BOOM FRAME ASSEMBLY REPAIR (CONT) (21) Install hydraulic hoses (21 and 22) in hose clamps (23). (22) Position two hose clamps (23) on folding boom frame (7) with two washers (24) and self-locking nuts (25). (23) Tighten two self-locking nuts (25) to 43-47 lb-ft (58-63 N·m). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (24) Apply sealing compound to threads of eight screws (26). (25) Position camlock assembly (27) on folding boom frame (7) with eight screws (26). (26) Tighten eight screws (26) to 114-126 lb-ft (154-170 N m). d. Follow-On Maintenance. (1) Install stinger cylinder (para 16-70). (2) Place hydraulic reservoir supply and return valves in open position (TM 9-2320-366-10-2). (3) Operate underlift and check for hydraulic leaks and proper operation (TM 9-2320-366-10-2). End of Task. 16-466