TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 689 of 1178
TM 9-2320-366-34-3 WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (3) Apply adhesive sealant on inner tube (2) and two upper wear plates (4). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. (4) Apply sealing compound to threads of four screws (5). (5) Position two skids (4) on inner tube (2) with four screws (5). (6) Tighten four screws (5) to 23-25 lb-ft (31-34 N m). (7) Apply adhesive sealant on wear plate (6). (8) Apply adhesive sealant on folding boom frame (7). (9) Apply sealing compound to threads of four screws (8). (10) Position lower wear plate (6) on folding boom frame (7) with four screws (8). (11) Tighten four screws (8) to 23-25 lb-ft (31-34 N·m). 16-463