TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 68 of 1178
TM 9-2320-366-34-3 15-2. CAB REPLACEMENT (CONT) CAUTION Use spreader bar and place sheet rubber on cargo sling to prevent damage to cab roof. Failure to comply may result in damage to equipment. (44) Lower cab door windows and install cargo sling through rear section of cab doors (79). WARNING • Standard cab weighs approximately 1400 lbs (636 kgs). M1093/M1094 cab weighs approximately 1700 lbs (772 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. • Cab may swing forward slightly when screws are removed. An assistant is required to steady cab. Failure to comply may result in injury to personnel or damage to equipment. NOTE Left and right side cab front support mounts are disconnected the same way. Right side shown. (45) Remove four screws (80) from cab front support mount (81). 15-12 Change 1