TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 676 of 1178
TM 9-2320-366-34-3 16-76. M1089 UPPER ARM REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions Underlift assembly in folded and down position (TM 9-2320-366-10-2). Engine shut down (TM 9-2320-366-10-1). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Press, Arbor, Hand Operated (Item 48, Appendix B) Sling, Cargo (Item 56, Appendix B) Materials/Parts Rag, Wiping (Item 60, Appendix C) Lockwasher (2) (Item 144, Appendix F) Nut, Self-Locking (4) (Item 176, Appendix F) Grease, Automotive and Artillery (Item 35, Appendix C) Lubricating Oil, Engine (Item 45, Appendix C) Personnel Required (2) a. Removal. WARNING Upper arm weighs approximately 190 lbs (86 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. (1) Remove four self-locking nuts (1), washers (2), and hose clamps (3) from upper arm (4). 16-450