TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 66 of 1178
TM 9-2320-366-34-3 15-2. CAB REPLACEMENT (CONT) WARNING Brace cab prior to removal of cotter pin from cab tilt cylinder mounting bolt. Failure to comply may result in serious injury or death to personnel or damage to equipment. (34) Install cab support tool on engine rear lifting eye (67). (35) Lower cab until cab rests on cab support tool (TM 9- 2320-366-10-1). (36) Remove cotter pin (68) and washer (69) from cab tilt cylinder mounting bolt (70). Discard cotter pin. (37) Loosen self-locking nut (71) on cab tilt cylinder mounting bolt (70). (38) Raise cab slightly and remove cab support tool from engine rear lifting eye (67) (TM 9-2320-366-10-1). 15-10