TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 659 of 1178
TM 9-2320-366-34-3 (2) Remove screw (3), lockwasher (4), and pin locking plate (5) from under lift assembly (6). Discard lockwasher. NOTE Step (3) requires the aid of an assistant. (3) Remove pivot pin (7) and bushing (8) from telescopic lift cylinder (9). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (4) Remove retaining ring (10) from cylinder end cap (11). NOTE Step (5) requires the aid of an assistant. (5) Remove telescopic lift cylinder (9) from underlift assembly (6). (6) Remove 90-degree fitting (2) from telescopic lift cylinder (9). (7) Remove preformed packing (10) from 90-degree fitting (2). Discard preformed packing. Change 1 16-435