TM-9-2320-366-34-3 MTV Direct Maintenance Manual M1083 Series - Volume 3 Download
Page 658 of 1178
TM 9-2320-366-34-3 16-72. M1089 TELESCOPIC LIFT CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Underlift assembly unfolded and in down position (TM 9-2320-366-10-2). Engine shut down (TM 9-2320-366-10-1). Hydraulic reservoir supply and return valve closed (TM 9-2320-366-10-2). Tools and Special Tools Tool Kit, Genl Mech (Item 78, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 92, Appendix B) Goggles, Industrial (Item 28, Appendix B) Tools and Special Tools (Cont) Sling, Cargo (Item 56, Appendix B) Materials/Parts Cap and Plug Set (Item 17, Appendix C) Lockwasher (Item 130, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 30, Appendix C) Packing, Preformed (Item 237, Appendix F) Personnel Required (2) a. Removal. WARNING Telescopic lift cylinder weighs approximately 225 lbs (102 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE · Tag hydraulic hoses and connection points prior to disconnecting. · Left and right side telescopic lift cylinders are removed the same way. Left side shown. (1) Disconnect hydraulic hose (1) from 90-degree fitting (2). 16-434